Novastar LED PROCESSOR J6 Splicing Processor

د.إ27,225.00

Novastar J6 Screen Splicing Processor

  • Seamless switching between input sources
  • Avoids black screen, blinking and image delay Supports over 20 special effects:

  • Appear | Fade in & Out | Slide in & out

  • Easy to Function – full color front panel LCD display

  • Ensured synchronization between signals – GENLOCK​

  • 16 template storage space, supports taskmanagement based on time
  • Editable window size and format
  • Supports PVW & PGM“TAKE” – One button switching
  • Splice multiple image/video screens, satisfy your needs for extra scale displays
  • Cross grid input/output monitoring
  • 8 sets of separate input sources with 2 setsextendable to any type of input sources
  • INPUT-A supports 4K UHD input
 
Input
Port Qty Resolution specifications
DualLink DVI/HDMI1.4/DP1.1 (Choose one from these inputs) 1 Supports 4K*2K@30Hz 2560×1600@60Hz(downward compatible)
DVI(DVI-D) 4 VESA standard 1920×1080@60Hz(downward compatible)
CVBS(BNC)/VGA(DB25)/HDMI/ DVI(DVI-D) (Choose one from these inputs) 1 VESA standard 1920×1080@60Hz(downward compatible)
SDI(BNC) 2 720p, 1080p
Input
Port Qty Resolution specifications
DVI(DVI-D) 4 Resolution is programmable output. The maximum supported resolution of each port is 1080p (DualLink output is available for DVI1 and DVI3.)
SDI Loop(BNC) 2 480i, 576i, 720p, 1080i/p(3G SDI), same as SDI input
HDMI(Type A) 1 Supported output resolution: 1920×1080@60Hz

Introduction

The J6 is a NovaStar’s high-performance seamless switcher that integrates video processing, screen mosaic,transition effects and multi-screen display capabilities. The J6 offers powerful video signal receiving and processing abilities and supports up to 8 inputs with the resolution up to 4K×2K@30Hz and 6 layers. In addition, this product
supports two system modes: Splicer and Switcher. When it is in Splicer mode, a maximum of 4 DVI output connectors can be used together for output, which can realize an up to 8KK loading capacity of each J6 unit. When it is in Switcher mode, a maximum of 2 DVI output connectors can be used together for output, which can realize an up to
4KK loading capacity of each J6 unit.


Based on a powerful FPGA platform, the J6 supports input and output EDID management and color adjustment, seamless transition on a variety of input sources, as well as fade and other transition effects, bringing you a more flexible and rich visual experience.


What’s more, the J6 is equipped with NovaStar’s smart control software V-Can and C1 event controller, allowing for a rich screen mosaic effect via V-Can, C1 or front panel operations. With excellent image quality, ultra-large loading capacity and flexible operation modes, the J6 can be widely used in conference reports, exhibition centers, stage control and other application scenarios.

Certifications

RCM, UL/CUL, IC, CB, RoHS, FCC, LVD, EMC
If the product does not have the relevant certifications required by the countries or regions where it is to be sold, please contact NovaStar to confirm or address the problem. Otherwise, the customer shall be
responsible for the legal risks caused or NovaStar has the right to claim compensation.

Features

  • Industry-standard input connectors
    − DVI connector: 1920×1080@60Hz input
    − HDMI 1.3 connector: 1920×1080@60Hz
    input
    − 3G-SDI connector: 1920×1080@60Hz input
    − DP 1.1 connector: 4K×2K@30Hz input
    − HDMI 1.4 connector: 4K×2K@30Hz input
  • 4 groups (2 connectors in each group) of DVI
    output connectors of a single J6 unit for mosaic
    output Each group includes a main connector and a backup connector. A maximum of 4 connectors can be used for mosaic output. The mosaic layout can be 4×1, 1×4 or 2×2. The maximum loading capacity can reach 9,200,000 pixels and
    the maximum mosaic width can be up to 15360
    pixels
  • Dual system modes
    Supports both Splicer and Switcher modes, which can meet different application requirements.
  • Multiple layer display
    Supports up to 6x 4K×2K layers that can be
    positioned freely and cross connector output.
    Supports layer border settings.
  • HDMI connector dedicated for output monitoring
    − Supports monitoring of a single input source,
    PVW or PGM.
  • Layer layout management
    The device is built-in with 7 layer layouts. You
    can load one of the layer layouts to quickly lay
    out the layers.
  • Multiple operation modes
    The device can be controlled via its front panel,
    the smart control software V-Can or C1 event
    controller.
  • Multiple J6 units controlled by one C1 unit
    – Supports mixed monitoring of all input
    sources, PVW and PGM.
    − Supports displaying of input resolution and
    refresh rate.
  • Display control function
    Makes the screen fade to black or freeze the
    screen by simply clicking one button.
  • EDID management
    Supports input resolution management on DVI,
    HDMI and DP connectors.
  • Transition effects
    In Splicer mode, the device supports the setting of transition effect for source and preset
    switching. In Switcher mode, the device supports the setting of Take effect and effect duration.
  • BKG capturing
    Supports the capturing of input source and
    PGM, and the captured image can be used as
    BKG.
  • BKG image and pure color BKG Supports both image BKG and pure color BKG.
    Up to 6 BKG images are supported.
  • Adjustable input color, layer color and output
    color
  • Preset management
    Up to 10 presets are supported and the preset
    can be loaded simply by clicking one button.
    You can perform operations, such as FTB,
    freeze or Take operation, to multiple J6 units on
    the C1.
  • AUX
    In Switcher mode, the device supports the AUX
    function.
  • Intuitive LCD screen and clear button indicators
    on front panel, simplifying system control operations

Appearance

Front Panel

Novastar-LED-PROCESSOR-J6-Splicing-Processor-Front-panel
No. Button Function
1
ON/OFF button
  •  Press ON to power on the device.
  • Press OFF to power off the device.
2
Layer buttons

Open or close a layer, and show the layer status.
Status LEDs:

  •  On: The layer is open, and the input source is accessed normally.
  • Dim: The layer is open, but the input source is abnormal.
  • Off: The layer is not opened.
  • Flashing: The layer is being edited.
    Hold down the layer button for 2s or longer to close the opened layer.
3
input source buttons

Switch the layer input source and show the input source status. Status LEDs:

  • On: The input source is accessed and in normal use.
  • Dim: The input source is accessed but not in use.
  • Off: The input source is not accessed or the source signal is abnormal.
4
LCD screen
Display the device menus, submenus and messages.
5
Knob
  • On the home screen, press the knob to enter the operation menu screen.
  • On the operation menu screen, rotate the knob to select a menu item, and press the
    knob to confirm the selection or enter the submenu.
  • When a menu item with parameters is selected, rotate the knob to adjust the
    parameters. Please note that after adjustment, you need to press the knob again to
    confirm the adjustment.
6
Freeze button

Freeze or unfreeze the output image.
Status LEDs:

  • On: The freeze function is enabled.
  • Off: The freeze function is disabled.
07
ESC button
Press the button to exit the current menu or cancel the operation.
8
Function buttons
  •  PRESET: Enter the preset menu.
  • BKG: Enable or disable the BKG function.
  • FTB/TEST: Press the button to make the screen fade to black and press the button
    again to exit the FTB mode. Hold down the button for 2s or longer to enter the testpattern menu.
  • FN/TAKE: The function of this button varies in different system modes (Splicer and Switcher).
    − In Splicer mode, press the button to enter the menu of the function that has
    been customized for Fn button. Hold down the button to enter the FN settings
    menu.
    − In Switcher mode, press the button to send PVW to PGM.

Rear Panel

Novastar-LED-PROCESSOR-J6-Splicing-Processor

Notes:

  • The picture shown is for illustration purpose only. Actual product may vary due to product enhancement.
  • The J6 provides two default configurations that differ in Input-F and Input-G connectors on the rear panel.
  • DP 1.1 and HDMI 1.4 connectors support at most 2 layers. Other connectors support at most 6 layers.

Input

No.       Connector Description
INPUT-A
DP 1.1

Input resolution up to 3840×2160@30Hz and custom EDID supported HDCP 1.3

compliant Interchangeable with HDMI 1.4 input card (Input resolution up to 3840×2160@30Hz and custom EDID supported, HDCP 1.4 compliant) Does not support interlaced signal inputs.

INPUT-B
3G-SDI
  • Input resolution up to 1920×1080@60Hz
  • Loop through function
  • Interlaced signal processing supported
  • Does not support input resolution and bit depth settings
INPUT-C
HDMI 1.3

CoInput resolution up to 1920×1080@60Hz and custom EDID supported
HDCP 1.4 compliant
Interlaced signal processing supported
Interchangeable with DVI or 3G-SDI input cardtent

INPUT-D
INPUT-E
DVI

Input resolution up to 1920×1080@60Hz, other VESA standard resolutions and
custom EDID supported
HDCP 1.4 compliant
Interchangeable with HDMI 1.3 or 3G-SDI input card
Does not support interlaced signal inputs.

INPUT-F
INPUT-G
DP 1.1 / DVI

The J6 has two default versions.

  •  Version I: INPUT-G is DP 1.1 input card that supports up to
    3840×2160@30Hz video source input and custom EDID. When it is changed
    to HDMI 1.4 input card, the INPUT-F is unavailable
  • Version II: INPUT-F and INPUT-G are DVI input cards that support up to
    1920×1080@60Hz and other VESA-standard compliant video source inputs
    and custom EDID. The two connectors both can be changed to HDMI 1.3 or
    3G-SDI input card
INPUT-H
3G-SDI

Input resolution up to 1920×1080@60Hz
Loop through function
Interlaced signal processing supported

Output

No. Connector Description
DVI
8

4 groups (2 connectors in each group) of DVI output connectors can be used for mosaic output. Each group includes a main connector and a backup connector. The J6 supports dual-link DVI output mode. When the output is set to dual-link mode, DVI 1 and DVI 3 are used as output connectors, while DVI 2 and DVI 4. are unavailable. In Splicer mode, DVI 3 can be used for AUX

MONITOR
1

An HDMI connector dedicated for monitoring all input sources, a single input source, PVW and PGM.

Control

Control
ETHERNET
1

Communicate with the control PC or connect to the network.

USB (Type-B)
1

Connect to the control PC for device control.

USB (Type-A)
1
A reserved connector
Overall Specifications
Power
1

AC100-240V~50/60Hz

Applications

The J6 supports dual system modes: Splicer and Switcher. The connections for two modes are shown in Figure 1 and Figure 2.

figure1
figure2

Dimensions

J6 Dimensions

dimension-j6

Flight Case Dimensions

Flight-Case-Dimensions

Specifications

Connector performance Common resolutions
  • DVI
  • HDMI 1.3

800×600@50/60/75/85Hz
1024×768@48/50/60/75/85Hz
1152×864@75Hz
1280×720@48/50/60Hz
1280×768@48/50/60/75Hz
1280×800@50/60Hz
1280×960@50/60/85Hz
1280×1024@48/50/60/75/85Hz
1360×768@60Hz
1364×1024@48/50/85Hz
1366×768@50/60Hz
1366×800@50/60Hz
1400×1050@48/50/60/75Hz
1440×900@60/75/85Hz
1600×900@48/50/60Hz
1600×1200@48/50/60Hz
1680×1050@60Hz
1792×1280@60Hz
1920×1080@30/48/50/60Hz
1920×1200@50/60Hz

  • DP 1.1
  • HDMI 1.4

800×600@50/60/75/85Hz
1024×768@48/50/60/75/85Hz
1152×864@75Hz
1280×720@48/50/60Hz
1280×768@48/50/60/75Hz
1280×800@50/60Hz
1280×960@50/60/85Hz
1280×1024@48/50/60/75/85Hz
1360×768@60Hz
1364×1024@48/50/85Hz
1400×1050@48/50/60/75Hz
1440×900@60/75/85Hz
1600×900@48/50/60Hz
1600×1200@48/50/60Hz
1680×1050@60Hz
1792×1280@60Hz
1920×1080@30/48/50/60Hz
1920×1200@50/60Hz
2048×1080@30/48/50/60Hz
2048×1152@30Hz
2304×1152@60Hz
2048×1152@60Hz
2560×1080@50/60Hz
2560×1400@50/60Hz
2560×1600@50/60Hz
3840×1080@30/50/60Hz
3840×2160@30Hz

3G-SDI

720×486i@59.94Hz
720×576i@50Hz
1280×720@23.98/24/25/29.97/30/50/59.94/60Hz
1920×1080i@50/59.94/60Hz
1920×1080@23.98/24/25/29.97/30/50/59.94/60Hz

Overall Specifications
Electrical specifications

Power connector

100-240V~, 50/60Hz, 2.1A
Power consumption
50 W
Operating environment
Operating temperature
–20℃ to +70℃
Operating humidity
20% to 90%, non-condensing
Storage humidity
10% to 95%, non-condensing
Physical specifications
Dimensions
482.6mm × 379.5mm × 95.5mm
Net weight
5.3 kg
Gross weight
15 kg
Packing information
Accessory

1x Power cord, 1x Ethernet cable, 2x DVI cables,
1x USB cable, 1x HDMI cable, 1x HDMI to DVI cable,
1x mini DP to DP cable
1x Flight case, 1x User Manual

Flight case
593mm × 544mm × 177mm
Noise Level (typical at 25°C/77°F)
50 dB(A)

Video Source Features

Brand

Novastar LED

NOVASTAR LED LOGO