Novastar CVT10-S 10x gigabit ethernet to fibre converter
The Novastar CVT10-S is a high-performance converter designed to convert 10x Gigabit Ethernet signals to fiber optic signals. It offers a range of features that make it an ideal choice for professional networking applications, including data centers, server rooms, and other large-scale environments.
One of the key features of the CVT10-S is its support for multiple Ethernet standards, including IEEE 802.3an and IEEE 802.3ab. This makes it easy to connect to a wide range of devices and ensures compatibility with most modern networking equipment.
In addition to its versatile input capabilities, the CVT10-S also includes advanced signal processing technology that helps ensure reliable and robust connections. This includes features such as auto-negotiation, flow control, and error correction.
The CVT10-S also supports a range of fiber optic cable types, including single-mode and multi-mode fibers with distances up to 20 km. And with its compact form factor and easy-to-use design, it can be easily integrated into existing network infrastructure without requiring extensive reconfiguration.
Another key feature of the CVT10-S is its rugged construction. It’s built using high-quality materials that are designed to withstand harsh environmental conditions and ensure long-term reliability.
Overall, the Novastar CVT10-S 10x Gigabit Ethernet to Fiber Converter is a powerful tool for anyone looking to extend their network over long distances or integrate fiber optic technology into their existing infrastructure. With its advanced features and robust design, it’s well-suited for use in a wide range of professional settings where reliable networking performance is essential.
- 2x 10G optical output (main + backup)
- 10x 1G ethernet port
- 19″ / 1U design
- Transmission distance up to 10 km
- Power and USB cable, SFP modules and installation gear included
The Novastar CVT10-S is a cost-effective long distance transmission solution for medium to large LED screen applications. It converts up to 10 network signal cables into a single fibre cable. Its design enables you to install it easily, securely and reliably in a 19-inch rack or case with a 1 unit height.
The CVT10-S can be connected directly to processors which are equipped with fibre optic output such as the VX1000, MCTRL660 PRO, Phobos R5 and the MCTRL4K.
This LED screen fibre convertor can be used both as receiver or transmitter and can therefore also be used with other Novastar processors. You’ll need two devices (TX/RX) when using a processor without fibre optic output.
The CVT10-S can be used for sending data of 10 individual 1 Gb signals to a distance of up to 10 km. It comes with a power cord, USB cable, 2x 10 G SFP (LC)modules, two supporting brackets (of which one with nuts), connecting piece, screws, 19″ installation kit and assembling diagram.Technical data:
|SFP Slot Type:
|SFP Slot Amount:
|SFP Module Fibre Connector Type:
|SFP Module(s) Included:
|Maximum Transmission Distance:
|100-240 VAC 50-60 Hz
|Power Connector in:
|IEC C13 female / powerCON TRUE1 In (Male)
|Data Connector in:
|Data Connector out: