Description

Novastar VX1000_Box Video Processor

The Novastar VX1000_Box Video Processor is a high-performance device that offers advanced processing capabilities for your LED display. With its powerful video scaling engine, the VX1000_Box can easily handle large-scale displays with high resolution and refresh rates. Its built-in HDR10 support ensures accurate color reproduction and contrast, while its user-friendly interface makes it easy to set up and configure. The VX1000_Box also supports multiple signal inputs, including HDMI, DVI, and VGA, allowing you to connect a wide range of devices. Plus, its compact design makes it easy to install and use in a variety of settings. Whether you’re creating immersive entertainment experiences or dynamic advertising displays, the Novastar VX1000_Box Video Processor is an excellent choice for your needs.
Input connectors
− 1x HDMI 1.4 (IN & LOOP)
− 1x HDMI 1.4
− 1x DVI (IN & LOOP)
− 1x DVI
− 1x 3G-SDI (IN & LOOP)
− 1x 10G optical fiber port (OPT1)
Output connectors
− 10x Gigabit Ethernet ports
A single device unit drives up to 6.5 million
pixels, with a maximum width of 10,240
pixels and a maximum height of 8192 pixels.
− 2x Fiber outputs
OPT 1 copies the output on 10 Ethernet
ports.
OPT 2 copies or backs up the output on 10
Ethernet ports.
− 1x HDMI 1.3
For monitoring or video output
Self-adaptive OPT 1 for either video input or
sending card output
Thanks to the self-adaptive design, OPT 1 can
be used as either an input or output connector,
depending on its connected device.
Audio input and output
− Audio input accompanied with HDMI input
source
− Audio output via a multifunction card
− Output volume adjustment supported
Size: 483*351*50mm
Weight: 6300G

Change History

Introduction

The VX1000 is NovaStar’s new all-in-one controller that integrates video processing and video control into one box. It features 10 Ethernet ports and supports video controller, fiber converter and Bypass working modes. A VX1000 unit can drive up to 6.5 million pixels, with the maximum output width and height up to 10,240 pixels and 8192 pixels, respectively, which is ideal for ultra-wide and ultra-high LED screen applications.

The VX1000 is capable of receiving a variety of video signals and processing high-resolution 4K×1K@60Hz images. In addition, the device features stepless output scaling, low latency, 3D, pixel-level brightness and chroma calibration and more, to present you with an excellent image display experience.

What’s more, the VX1000 can work with NovaStar’s supreme software NovaLCT and V-Can to greatly facilitate your in-field operations and control, such as screen configuration, Ethernet port backup settings, layer management, preset management and firmware update.

Thanks to its powerful video processing and sending capabilities and other outstanding features, the VX1000 can be widely used in applications such as medium and high-end rental, stage control systems and fine-pitch LED screens.

Certifications

CE, UL&CUL, IC, FCC, EAC, UKCA, KC, RCM, CB, RoHS

If the product does not have the relevant certifications required by the countries or regions where it is to be sold, please contact NovaStar to confirm or address the problem. Otherwise, the customer shall be responsible for the legal risks caused or NovaStar has the right to claim compensation.

Features

• Input connectors
  − 1x HDMI 1.4 (IN & LOOP)
  − 1x HDMI 1.4
  − 1x DVI (IN & LOOP)
  − 1x DVI
  − 1x 3G-SDI (IN & LOOP)
  − 1x 10G optical fiber port (OPT1)
• Output connectors
  – 10x Gigabit Ethernet ports
  A single device unit drives up to 6.5 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.
  − 2x Fiber outputs
• Output connectors
  – 10x Gigabit Ethernet ports
  A single device unit drives up to 6.5 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.
  − 2x Fiber outputs
  OPT 1 copies the output on 10 Ethernet
  ports.
  OPT 2 copies or backs up the output on 10
  Ethernet ports.
  1x HDMI 1.3
  For monitoring or video output
• Self-adaptive OPT 1 for either video input or sending card output
  Thanks to the self-adaptive design, OPT 1 can
  be used as either an input or output connector,
  depending on its connected device.
• Audio input and output
  – Audio input accompanied with HDMI input source
  – Audio output via a multifunction card
  – Output volume adjustment supported
  – Backup between input sources
• Low latency
  Reduce the delay from the input to receiving
  card to 20 lines when the low latency function
  and Bypass mode are both enabled.
• 3x layers
  – Adjustable layer size and position
  − Adjustable layer priority
• Output synchronization
  An internal input source or external Genlock can
  be used as the sync source to ensure the output
  images of all cascaded units in sync.
• Powerful video processing
  – Based on SuperView III image quality processing technologies to provide stepless output scaling.
  − One-click full screen display
  − Free input cropping
• Easy preset saving and loading
  – Up to 10 user-defined presets supported
  − Load a preset by simply pressing one button
  − Free input cropping
• Multiple kinds of hot backup
  – Backup between devices
  − Backup between Ethernet ports
  – Backup between input sources
• Mosaic input source supported
  The mosaic source is composed of several input
  connectors of the same type.
• Up to 4 units cascaded for image mosaic
• Three working modes
  − Video Controller
  − Fiber Converter
  − Bypass
• All-round color adjustment
  Input source and LED screen color adjustment
  supported, including brightness, contrast,
  saturation, hue and Gamma
• 3D function
  Work with the EMT200 3D emitter and matched 3D glasses to present a 3D visual experience.
• Pixel level brightness and chroma calibration
  Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve
  LED display brightness and chroma consistency, allowing for better image quality
• Multiple operation modes
  Control the device as you wish via V-Can, NovaLCT or device front panel knob and buttons.

Appearance

Front Panel

Note:
Hold down the knob and ESC button simultaneously for 3s or longer to lock or unlock the front panel buttons

Rear Panel

Output Connectors

Optical Fiber Ports

Control Connectors

Note:
Only the main layer can use the mosaic source. When the main layer uses the mosaic source, PIP 1 and 2 cannot be
opened

Applications

Dimensions

The VX1000 provides the flight case or carton packaging. This section provides the dimensions of the device, flight
case and carton, respectively

Device

Packaging

Flight Case

Specifications