Video, Audio, and Control Signals Can Be Distributed by DIGITAL LINK Single Cable Daisy Chain
The terminal board for the LFV70 Series is equipped with a DIGITAL LINK output terminal. Video, audio and control signals are combined into one DIGITAL LINK signal and can be transmitted by single cable daisy chain connection.
This enables not only a multi-screen system to be configured using only displays and video sources with no need for a video splitter or other device, but also easy installation and control of multi-screen system thanks to simple cabling.
Failover and Failback Functions Support Emergency Situations
The LFV70 Series is equipped with digital signal input terminals of two DVI-D, HDMI, DisplayPort, DIGITAL LINK, and USB. If the main video and audio signals are interrupted, the system immediately switches to alternative signals. This makes it ideal for mission critical control rooms and surveillance centres.
Installation Frame Simplifies Set-up
The optional Installation Mount makes it much easier to configure a video wall. There’s no need for complicated display positioning, and fluctuations between installers are covered. It also saves time and cuts labor costs.
USB Easy Synchronised Playing
Simply connect USB memory sticks containing still contents files to a 2×2-unit multi-screen configuration for easy synchronized 4K signages.
High Reliability Enables Continuous 24-Hour Operation and Portrait Installation
The use of a highly durable panel and electronic components allows continuous 24-hour operation, ideal for installation in public places, surveillance stations, etc. A built-in cooling fan automatically operates (when set to Auto) depending on the temperature. This prevents overheating in the upper screens of a multi-screen installation, which are easily subject to heating. The TH-55LFV70 can also be installed either horizontally or vertically, without any difference in panel life, so there is no effect on TCO.
Calibration Functions Support Multi-Screen Installation
New calibration software
Colour differences can develop between displays as time passes after multi-screen installation. This new calibration software supports sensors that are sold by a variety of suppliers. It lets you adjust colours while using your existing calibration sensor.
The colour is adjusted on the LFV70 Series when it is shipped from the factory so there is no adjustment necessary during installation, which greatly shortens the time required for multi-screen installation. Colour differences between the displays are also suppressed in order to display natural-appearing images.
An Ultra-Narrow Bezel for Seamless, Large-Screen Layouts
The ultra-narrow bezel results in joints that are only 3.5 mm (0.14″) wide for video wall installations. Even in large-screen configurations, the screen borders can barely be seen, so images are powerful and natural.
PRICES INCLUDE VAT
There are no reviews yet.